Filter
Top Products
PCA
Instruction 24-9351
4-26
Operation
4.20 Maintenance Screen
MAINTENANCE
«CALIBRATION
USER NAME
The Maintenance Screen is displayed after entering the correct password
in the Maintenance Password Screen (Section 4.19). Use this screen to
enter either the analyzer’s Calibration Screen or User Name Screen.
To enter the Calibration Screen, first use the st keys to position the
cursor (z) in front of CALIBRATION, and then press the key.
NOTE: Section 5.0 contains detailed calibration procedures.
To enter the User Name Screen, first use the st keys to position the
cursor (z) in front of USER NAME, and then press the key.
Front Panel Key Functions:
– Toggle cursor (z) position
– Toggle cursor (z) position
– Select function next to cursor
– Go to Combustion Test Screen
– No action