Filter
Top Products
Instruction 24-9351
PCA
4-31
Figure 4-7. Reset Button
Operation
4.24 Clear Memory Screen
CLEAR MEMORY
C
«E
The Clear Memory Screen is accessed from either the Memory Directory
Screen (Section 4.10) or the Memory to PC Screen (Section 4.11).
To clear all memory locations, use the st keys to place the cursor (z) in
front of the clear (C) function, and then press the key.
To return to the previous screen without clearing any memory locations, use
the st keys to place the cursor (z) in front of the exit (E) function; then
press .
4.25 Resetting the Microprocessor
If the analyzer “locks-up” and cannot be turned OFF, reset the micropro-
cessor by pressing the RESET button (Figure 4-7). The button can be
activated using the end of a paper clip.
G A S
R E S E T
P O W E R
T -S T A C K
T -A IR
RESET
BUTTON