Filter
Top Products
Instruction 24-9351
PCA
4-29
4.23 Printing Test Data
O2 4.0 CO 12 HLD DRAFT
C2 9.5 CU 15 NG DRAFT – 0.25 MB
TL 20.0 TA 190 «P HOT SPOT 190 °C «P
qA 8.1 LA 1.24 S S
Before printing, ensure that the correct
connection and printer has been selected per
Section 4.18.
The Print function is available in either the
Combustion Test Screen or the Draft Screen*.
NOTE: The data which is stored in
memory can also be printed. First go to
the Memory Directory Screen (Section
4.10) and display the data to be printed;
then print the data as described below.
When using an infrared printer:
1. Place analyzer in-line with the printer’s
IR input (see Figure 4-5).
2. Use the st keys to move the cursor (z) in
front of the print (P) function.
3. Press the key to start printing.
Figure 4-5. Aligning the Printer
0
0 I
M EN U
P C A
4 5 c m
( 1 8 in .)
m a x .
6 0 °
m a x .
* The HOT SPOT line shown in the Draft
Screen does not appear on the printout.
Operation