Filter
Top Products
Instruction 24-9351
PCA
4-13
4.10 Memory Directory Screen
MEMORY DIRECTORY MEMORY DIRECTORY
«M8 28.7.97 15:45 «98 28.7.97 15:45
M9 MEMORY EMPTY 99 MEMORY EMPTY
CLEAR MEMORY CLEAR MEMORY
The Memory Directory Screen is displayed by repeatedly pressing the
MENU key from the Combustion Test Screen. This screen is used to select
a memory location that contains saved data which an operator can re-
view.
NOTE: A ‘standard’ PCA has 10 memory locations num-
bered M0 thru M9, while an ‘advanced’ PCA has 100 memory
locations numbered 0 thru 99.
To select a data-memory location, first use the st keys to move the
cursor (z) in front of the desired memory location; then press the key.
The saved data is now displayed in either the Combustion Test Screen or
Draft Screen, depending on whether the chosen memory location contains
combustion or draft information. To print the saved data, refer to Sec-
tion 4.23.
After viewing or printing the saved data, use the st keys to move the
cursor (z) to the exit (E) function; then press . This will redisplay the
memory directory.
Selecting the CLEAR MEMORY function displays the Clear Memory
Screen from where all saved data can be erased (refer to Section 4.24).
Front Panel Key Functions:
– Move cursor (z) up
– Move cursor (z) down
– Display the data saved at the chosen memory location
– Go to Combustion Test Screen
– Go to Temperature Setup Screen, or the
Memory To PC Screen for Advanced units
‘Standard’ PCA Screen ‘Advanced’ PCA Screen
Operation