Filter
Top Products
PCA
Instruction 24-9351
* Available only on the PCA 30, 35, 60, & 65
** The year displays as two digits on the instrument, and
four digits on the printout.
3-4
Setup
3.4 Configuring the PCA
The PCA is configured at the factory for the parameters shown below, but
can be changed by following the instructions in the associated sections.
Function Parameters To Change,
Refer to . . .
Fuel Natural Gas Section 4.8
Temperature ºC Section 4.13
Optional Draft MB Section 4.14
Language English Section 4.15
Display Mode* CO & NX Section 4.16
Time HR:MIN:SEC Section 4.17
Date** DD.MM.YY Section 4.17
Printer IrDA Section 4.18