Filter
Top Products
PCA
Instruction 24-9351
4-30
Operation
When using a serial printer:
1. First connect the analyzer to the printer using the optional RS-232
cable (see Figure 4-6).
2. Set the printer’s communication parameters to 9600 baud, 8 data bits,
1 stop bit, no parity, and no handshaking.
3. Use the st keys to move the cursor (z) in front of the print (P)
function.
4. Press the key to start printing.
Figure 4-6. Connecting a Serial Printer to the Analyzer
R S - 2 3 2 C o n n e c t o r
G A S
R E S E T
P O W E R
T -S T A C K
T -A IR
A t t a c h D B 9 C o n n e c t o r t o p r i n t e r ' s
s e r i a l i n p u t p o r t . I f n e c e s s a r y ,
u s e a 2 5 - p i n t o 9 - p i n a d a p t e r .
S e r i a l D a t a C a b l e
P a r t N o . 2 4 - 1 0 7 3