Filter
Top Products
NOTE: If the optional remote control system has been ordered with the stove and is not
fitted please proceed.
FOR A
MANUAL STOVE (WITHOUT REMOTE CONTROL) PROCEED TO PAGE 22.
INSTALLATION OF REMOTE CONTROL SYSTEM
Important
• A corgi registered gas engineer must carry out the installation of the remote control system
P
AR
TS LIST
1 Motor
2 Ultrasonic Receiver
3 Remote control handset
4 Wiring Harness (Multiblock end to reciever, spade connections to motor/micro switch)
5 Micro-switch
6 AA/LR6 1.5v Batteries (4x) & 9V-6F22 9v Battery (1) Supplied (Not Shown)
Technical data
Ambient temperature range Remote and receiver max. 140deg F / 60deg C
Connecting cable max. 356deg F / 180deg C
Batteries Quality Alkaline Handset: 1x9V Block
Receiver: 4x1.5V AA
18 Aarrow Sherborne GSL CF
INSTALLATION INSTRUCTIONS
1
2
3
5
4
Fig. 15