Filter
Top Products
3) Place the curved log to the left hand side of the
firebox, rest the top of this log onto the top of the
Y shaped open end of the rear log. Take the
straight log and position this to the right hand side
of the firebox, again rest the rear of this log onto
the rear Y shaped log, opposite end to the curved
log. Note, rest both fronts of these end logs
against the front corners of the burner.See Fig.14b.
4) Next place the 2x large twigs into the layout
with the base of each twig central about the stove
opening and placed to the front of the stove. The
tops of these twigs radiate out from the base to
form a vee shape and rest upon the rear Y log (left
hand) and straight log (right hand). The medium
twig is placed between the large twigs as shown in
Fig. 14c.
5) The remaining 3X small twigs are placed as
shown in Fig. 14d. The LPG log layout is now
complete.
Aarrow Sherborne GSL CF 17
INSTALLATION INSTRUCTIONS
Fig. 14a
Fig. 14b
Fig. 14c
Fig. 14d