Filter
Top Products
Tools Needed:
22
Tools Needed:
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Pre-wrap the Torquemaster
®
Plus cable drum
with the counter balance cable 1-1/2 wraps.
To install the cable drum, slide the correct cable
drum over the winding shaft until the cable drum
seats against the TorqueMaster
®
Plus spring tube
assembly.
The winding shaft must extend past the cable
drum far enough to expose the splines and the
groove. Align the winding shaft groove with the
round notch in the flagangle.
For double spring applications, repeat for
opposite side.
For single spring applications, pre-wrap the left
hand Torquemaster
®
Plus cable drum with
counterbalance cable 1-1/2 wraps and insert the
loose winding shaft into the cable drum prior to
sliding the cable drum over the TorqueMaster
®
spring tube assembly.
NOTE: On single spring applications, take care in
handling the loose winding shaft (left side) so
that it does not slide back into the TorqueMaster
®
Plus spring tube assembly.
WINDING SHAFT
CABLE DRUM
GROOVE
ROUND NOTCH
FLAGANGLE
SPLINES
COUNTERBALANCE CABLE
CABLE
DRUM
WINDING SHAFT
SPLINES
GROOVE
LOOSE WINDING
SHAFT
IMPORTANT: WARNING TAGS MUST BE
SECURELY ATTACHED TO BOTH END
BRACKETS.
End brackets are right and left hand.
You can identify the right hand end
bracket by the disconnect cable guide
hole in the top of the bracket.
Beginning with either side, slide the
end bracket onto the winding shaft so
that the grooves in the ratchet wheel fit
onto the winding shaft splines.
Secure end bracket to the jamb using
(1) 5/16” x 1-5/8” hex head lag screw
and (1) 5/16”-18 x 3/4” carriage bolt
and hex nut.
Repeat for other end bracket.
22
End Brackets
Power Drill
5/16” Wrench
7/16” Socket
Driver
Step Ladder
Cable
Drum
No
space
betwee
n R
atchet
Paw
l a
nd Cable Drum
ind
icate
s engagement
Cable D
rum
Ratch
et Pawl
ENG
AGE
D SIDE
VIEW
No
space
betwee
n
Rat
chet Pawl
and
Cable Drum
ENGAG
ED UNDE
R
NE
A
T
H VIEW
Space
between Ratchet Pawl
and Cable D
rum
non-indic
ates engage
men
t
Cable Drum
Ratch
et Pawl
DISE
NGAGED S
IDE V
IEW
No space between
Rat
chet Pawl
and
DISENGAGED U
NDERNE
A
TH VIEW
UPPER
POS
ITION
LOWER
POS
ITION
LOWER P
OSITION SI
DE VIEW
UPPE
R POS
ITION SIDE VIEW
Ratch
et Pawl in Lowe
r P
osition
Ratch
et Pawl in Upper
Posit
ion
Use
the
se Illustration,
in co
njunction w
ith the Instruct
ions
on the other side of
this l
abel.
WA RNING
Rachet Br
acket is
under
EXTREM
E SPRING
TEN
SION
.
To avoid possible
severe or
fatal injur
y,
DO NOT
re
move
fasteners
fr
om rat
chet
bracket
until spr
ing(
s) a
re full
y
wnwo
und.
To saf
ely
unwi
nd spring(s)
read
and fol
low t
he directio
ns in the
inst
allati
on instructions/owners
manual.
DO NOT RE
MOVE THIS TAG
.
SPLINES
WINDING
SHAFT
GROOVE
DISCONNECT
CABLE GUIDE
HOLE
RIGHT END
BRACKET
WARNING
TAG
Cable Drums Continued...