Filter
Top Products
Tools Needed:
20
Tools Needed:
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
TorqueMaster
®
Spring Tube
TorqueMaster
®
springs come lubricated
and pre-assembled inside the
TorqueMaster
®
spring tube.
To install, lay the TorqueMaster
®
spring
tube on the floor (inside garage) in front
of the door with the labeled end to the
left.
LABELED END
TORQUEMASTER
®
SPRING TUBE
None
19
18
Adjusting Top Roller Slide
With horizontal tracks installed, you can
now adjust the top roller slide.
Vertically align the top section of the
door with the lower sections. Once
aligned, position the top roller,
out against the horizontal track, while
keeping the roller slide parallel with the
section.
Maintaining the slide’s position,
tighten the (2) 1/4” - 14 x 5/8” self
tapping screws.
TOP ROLLER
SLIDE
Power Drill
7/16” Socket
Driver
Step Ladder
TOP SECTION
1/4”-14 X 5/8” SELF
TAPPING SCREWS
CORRECT INCORRECT
TOP SECTION