Wayne-Dalton 46 Door User Manual


 
3
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Package Contents
(1) TORQUEMASTER
®
SPRING TUBE
(2) HORIZONTAL TRACK WITH ATTACHED HORIZONTAL ANGLE RH/LH
NOTE: DEPENDING ON THE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SUPPLIED IF NOT NECESSARY.
REAR SUPPORTS MAY OR MAY NOT BE INCLUDED WITH YOUR DOOR.
DOOR SECTIONS (AS REQUIRED)
(2) VERTICAL
RH/LH TRACK
IDRIVE
®
OPERATOR
(SOLD SEPARATELY)
(1) STEP PLATE
INSIDE
WEATHER SEAL &
NAILS (IF INCLUDED)
(2) FULLY ADJUSTABLE
RH/LH FLAGANGLES
U-BAR
(AS REQUIRED)
COUNTER GEAR(S)
(AS REQUIRED)
(2) TOP BRACKET
SLIDES
(2) TOP BRACKET
BASES
LUBRCIATING OIL
(AS REQURED)
(1) LOOSE WINDING SHAFT
(SINGLE SPRING ONLY)
#1, #2, #3 & #4
HINGES (AS REQURED)
RIGHT AND LEFT
BOTTOM BRACKETS
ROLLERS
(AS REQUIRED)
RIGHT AND LEFT CABLE
DRUM ASSEMBLIES
#6 SCREW EYE AND PULL
ROPE (IF INCLUDED)
(2) LIFT HANDLES
& SPACERS
COUNTER COVER(S)
(AS REQUIRED)
DRIVE GEARS
(AS REQUIRED)
(1) CENTER BRACKET
ASSEMBLY
(1) STEP PLATE
OUTSIDE
RIGHT & LEFT
END BRACKETS
MANUAL
8000 Series, Model 46
IMPORTANT NOTICE!
Read these instructions carefully before
attempting installation. If in question about
any of the procedures, do not perform the
work. Instead, have a qualified door agency
do the installation or repairs.
© Copyright 2005 Wayne-Dalton Corp. Part No. 323295 New 11/08/2005
TorqueMaster
®
- Single and Double Spring
Installation Instructions and Owner’s Manual
Portland Source Plant
JAMB BRACKETS
(AS REQUIRED)
RIGHT & LEFT
DRUM WRAPS