Filter
Top Products
16
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
U-BAR
TOP
SECTION
TOP
SECTION
U-BAR
(2) 1/4”- 20 X 7/8”
SELF DRILLING
SCREWS
ATTACHING END STILE
U-Bar
8
NOTE: For door section identification see
page 4.
INSTALLATION ON THE TOP SECTION:
Doors 14’0” wide and over, locate U-Bar
above top bracket and secure with
(2) 1/4”-20 x 7/8” self drilling screws at
each end and center stile location.
NOTE: 3” U-Bars are now supplied with
all glazed doors starting at 14’0” width.
INSTALLATION ON ALL OTHER
SECTIONS:
NOTE: All U-Bars are placed at the top
of the section, against the bottom of the
hinges, for the intermediate, lock and
bottom sections.
NOTE: For doors 16’1” to 18’0” that
have a glazed intermediate section, the
U-bar needs to be placed on the glazed
intermediate section.
NOTE: All WayneMark™ 8200 doors
14’0” to 16’0” wide, 6’0” to 7’0” high (4
section high only) are now supplied with a
2” U-Bar for the top of the bottom section.
Place the U-Bar on the section against the
bottom of the hinges. Center the U-Bar
side to side on the section at the location
shown, and secure to the section using
(2) 1/4”-20 x 7/8” self drilling screws at
each end and center stile location.
Power Drill
7/16” Socket
Driver
Model 46 U-Bar Schedule
Door Width 4 Section 5 Section
8’-0” to 14’-11” N/A N/A
15’-0” to 16’-0” (1) 2” U-Bar (1) 2” U-Bar
16’-1” to 18’-0” (3) 2” U-Bar (3) 2” U-Bar
8000 Series U-Bar Schedule
Door Width 4 Section 5 Section
8’-0” to 13’-11” N/A N/A
14’-0” to 14’-11” (1) 2” U-Bar (1) 2” U-Bar
15’-0” to 16’-0” (1) 2” U-Bar (1) 2” U-Bar
16’-0” to 18’-0” (3) 2” U-Bar (3) 2” U-Bar
ATTACHING CENTER STILE
(2) 1/4”- 20 X 7/8”
SELF DRILLING
SCREWS
(2) 1/4”- 20 X 7/8”
SELF DRILLING
SCREWS
U-BAR
U-BAR
HINGE
HINGE
BOTTOM SECTION
BOTTOM
SECTION
U-BAR PLACEMENT FOR BOTTOM, LOCK AND INTERMEDIATE SECTIONS
U-BAR PLACEMENT FOR TOP SECTION
U-BAR
TOP
BRACKET
ASSEMBLY
TOP SECTION
SIDE PROFILE
HINGE
DOOR
SECTION
U-BAR
U-BAR PLACEMENT FOR TOP SECTION