Filter
Top Products
3
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Package Contents
(1) TORQUEMASTER
®
SPRING TUBE
DOOR SECTIONS (AS REQUIRED)
(2) TOP BRACKET SLIDES
1/4” - 14 X 5/8” SELF-TAPPING
SCREWS (AS REQUIRED)
1/4” - 20 X 7/8” SELF-DRILLING
SCREWS (AS REQUIRED)
(4) 1/4” - 20 X 5/8”
CARRIAGE BOLTS
(2) VERTICAL
TRACKS RH/LH
(2) 3/8” - 16 X 3/4”
TRUSS HEAD BOLTS
(1) CENTER BRACKET
ASSEMBLY
(2) QUICK INSTALL RH/LH
FLAGANGLE (AS REQUIRED)
(2) HORIZONTAL TRACKS RH/LH
NOTE: DEPENDING ON THE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SUPPLIED IF NOT
NECESSARY. REAR SUPPORTS MAY OR MAY NOT BE INCLUDED WITH YOUR DOOR.
ROLLERS
(AS REQUIRED)
(1) OPERATOR BRACKET
(2) HORIZONTAL ANGLES
(22”, 80” OR 94”)
(AS REQUIRED)
(2) TOP BRACKET BASES
SCREW EYE AND
PULL ROPE
(IF INCLUDED)
5/16” X 1 5/8” HEX HEAD LAG SCREWS
(AS REQUIRED)
(1) LOOSE WINDING SHAFT
(SINGLE SPRING ONLY)
RIGHT AND LEFT CABLE
DRUM ASSEMBLIES
WEATHER SEALS & NAILS
(IF INCLUDED)
RIGHT & LEFT
DRUM WRAPS
TorqueMaster
®
Plus - Single and Double Spring
Installation Instructions and Owner’s Manual
9800 SERIES
IMPORTANT NOTICE!
Read these instructions carefully before
attempting installation. If in question about
any of the procedures, do not perform the
work. Instead, have a qualified door agency
do the installation or repairs.
© Copyright 2007 Wayne-Dalton Corp. Part No. xxxxxx NEW 01/03/2007
MANUAL
1/4” - 20 FLANGED HEX
NUTS (AS REQUIRED)
RIGHT & LEFT
END BRACKETS
Cable Drum
No space betw
een Ratchet
Pawl
and Cabl
e Drum
indicates engagem
ent
Cable Drum
Ratchet
Pawl
ENGAGED SI
DE VIEW
No space betw
een
Ratchet
Pawl
and
Cable Drum
ENGA
GED UNDERNEATH VIEW
Space between Ratchet Pawl
and Cabl
e Drum
non-indicates engagem
ent
Cable Drum
Ratchet Pawl
DISENGAGED
SIDE VIEW
No space betw
ee
n
Ratchet
Pawl
and
DISENGA
GED U
NDERNEATH VIEW
UPPER
POSITION
LOWER POSI
TION
LOW
ER
POSITION
SIDE VIEW
UPPER
POSI
TION SIDE VIEW
Ratchet Pawl
in Low
er Position
Ratchet
Pawl in Upper Pos
ition
Use these Illustration
, in conjunction with
the Instructions on the other side of
this label.
WARNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
To avoid possible severe or
fatal injury,
DO NOT
remove
fasteners from ratchet bracket
until spring(s) are fully
wnwound.
To safely unwind spring(s)
read
and follow the directions
in the
installation instructions/owners
manual.
DO NOT REMOVE THIS TAG.
Ratchet
Pawl
ENGA
GED
SIDE VIEW
No space betw
een
NDERNE
ATH VIEW
WARNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
To avoid possible severe or
fatal injury,
DO NOT
remove
fasteners from ratchet bracket
until spring(s) are fully
wnwound.
To safely unwind spring(s)
read
and follow the directions in the
installation instructions/owners
manual.
DO NO
T REMOVE THIS TAG.
Q.I. JAMB BRACKETS
(AS REQUIRED)
(2) 3/8” - 16 HEX
NUTS
(1) COTTER PIN(1) 5/16” X 1-1/4”
CLEVIS PIN
(2) 5/16” - 18 X 3/4”
CARRIAGE BOLTS
(2) 5/16” - 18
HEX NUTS
(2) FULLY ADJUSTABLE RH/LH
FLAGANGLE (AS REQUIRED)
STUD PLATES
(AS REQUIRED)
1/4” - 20 X 5/8” SELF-DRILLING
SCREWS (AS REQUIRED)
F.A. JAMB BRACKETS
(AS REQUIRED)
DOOR STOP & NAILS
(IF INCLUDED)
1/4” - 20 X 9/16” LARGE
HEAD RIBBED TRACK BOLTS
(AS REQUIRED)