Filter
Top Products
Tools Needed:
17
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
INSTALLATION
OPERATOR
BRACKET
U-BAR
OPERATOR BRACKET IN
PLACE UNDER U-BAR
(6) 1/4” - 20 X 5/8”
SELF-DRILLING
SCREWS
TOP SECTION
OPERATOR
BRACKET
U-BAR
1/4” - 20 X 7/8”
SELF-DRILLING SCREWS
SIDE VIEW OF U-BAR ON TOP
SECTION
U-BAR
11
Power Drill
7/16” Socket
Driver
Operator Bracket
NOTE: If installing a trolley type
operator, complete this step. If not, skip
this step and continue with Step 12.
IMPORTANT: WHEN CONNECTING A
TROLLEY TYPE GARAGE DOOR OPENER
TO THIS DOOR, A WAYNE-DALTON
OPENER / TROLLEY BRACKET MUST
BE SECURELY ATTACHED TO THE TOP
SECTION OF THE DOOR, ALONG WITH
ANY U-BARS PROVIDED WITH THE
DOOR. THE INSTALLATION OF THE
OPENER MUST BE ACCORDING TO
MANUFACTURER’S INSTRUCTIONS AND
FORCE SETTINGS MUST BE ADJUSTED
PROPERLY.
Remove, but retain (4 - 6) 1/4” - 20 x
7/8” self-drilling screws from the center
of the u-bar, allowing the operator
bracket to slide between the top section
and the u-bar.
NOTE: For retro fit applications, the
operator bracket must be aligned with
an existing operator
Locate the center of the top section and
slide operator bracket under u-bar till
the operator bracket is seated against
the u-bar flange. Attach the operator
bracket using (6) 1/4” - 20 x 5/8”
self-drilling screws (as shown). Finish
re-attaching the u-bar using the self-
tapping screws removed previously.
TOP SECTION
TOP SECTION