Wayne-Dalton 341458 Garage Door Opener User Manual


 
Tools Needed:
22
Tools Needed:
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
18
NOTE: Drum wraps must be installed
prior to installing the TorqueMaster
®
plus end bracket. Drum wrap installation
after the end bracket is installed, is not
possible without un-installing the end
bracket and it’s components.
IMPORTANT: RIGHT AND LEFT HAND IS
ALWAYS DETERMINED FROM INSIDE THE
GARAGE LOOKING OUT.
Drum wraps are identified as right and
left. Slide the left hand drum wrap over
the left side of the TorqueMaster
®
spring
tube assembly with the tabs facing left.
Continue sliding the left hand drum wrap
towards the center of the TorqueMaster
®
spring tube assembly. Slide the right
hand drum wrap over the right side of
the TorqueMaster
®
spring tube assembly
with the tabs facing right. Continue
sliding the right hand drum wrap
towards the center of the TorqueMaster
®
spring tube assembly.
LEFT HAND DRUM WRAP
Drum Wraps
None
RIGHT HAND DRUM WRAP
19
TORQUEMASTER
®
SPRING TUBE ASSEMBLY
TABS
LEFT HAND DRUM WRAP
Shake the TorqueMaster
®
spring tube
assembly gently to extend the winding
shafts out about 5" on each side. For
single spring applications, there will be
no left hand spring in the TorqueMaster
®
spring tube assembly.
Lift the TorqueMaster
®
spring tube
assembly and rest it on the top of the
flagangles.
NOTE: Cable drums are marked right
and left hand. Cable drums and
TorqueMaster
®
spring tube assembly
are cam shaped to fit together only one
way.
IMPORTANT: RIGHT AND LEFT HAND IS
ALWAYS DETERMINED FROM INSIDE THE
GARAGE LOOKING OUT.
To install the cable drum, slide the
correct cable drum over the winding
shaft until the cable drum seats against
the TorqueMaster
®
spring tube
assembly.
WINDING
SHAFT
RIGHT DRUM
5”
Cable Drums
Tape Measure
TORQUEMASTER
®
SPRING TUBE ASSEMBLY
TORQUEMASTER
®
SPRING TUBE ASSEMBLY