Filter
Top Products
Getting Started Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 56
3.6.3. O
2
SENSOR CALIBRATION PROCEDURE
If your GFC 7001E/EM is equipped with the optional O
2
sensor, this sensor should be calibrated during
installation of the instrument. See Section 9.7.1 for instructions.
3.6.4. CO
2
SENSOR CALIBRATION PROCEDURE
If your GFC 7001E/EM is equipped with the optional CO
2
sensor, this sensor should be calibrated during
installation of the instrument. See Section 9.7.2 for instructions.
The GFC 7001E/EM Analyzer is now ready for operation
NOTE
Once you have completed the above set-up procedures, please fill out the Quality Questionnaire that
was shipped with your unit and return it to Teledyne API.
This information is vital to our efforts in continuously improving our service and our products.
THANK YOU.
.