Teledyne GFC 7001EM Carbon Monoxide Alarm User Manual


  Open as PDF
of 321
 
Remote Operation Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 176
8.6.3. ACTIVATING HESSEN PROTOCOL
Once the COMM port has been properly configured, the next step in configuring the GFC 7001E/EM to operate
over a Hessen protocol network is to activate the Hessen mode for COMM ports and configure the
communication parameters for the port(s) appropriately.
To activate the Hessen Protocol, press:
 previous next