Filter
Top Products
16
Important: To the Operator Model C006
Prime All Flavors and Liquid Sugar
Prime All Men u Screen
The Prime All Menu screen allows the operator to prime all of the flavors, including liquid
sugar, simultaneously. Be sure that every flavor, including liquid sugar, being primed has
been refilled to the fill line indicated on the tank and the control has been reset (refer to
Flavor Refill and Level Reset on page 12.
Step Action
1 Press the CLEAN/CAL button. The screen will prompt the
operator to enter the access code. Use the size buttons to
enter the code as follows: 3 (MED) 2 ( SM) 1 (X-SM).
2 Upon entry, the screen will read “CLEAN PRESS FLVR”.
3 Place an empty coffee cup beneath the dispensing spout.
4 Press the CLEAN/CAL button twice to display “PRIME ALL
<1>”.
5 Press the number “1” ( X-SM) button.
6 The display will read “PRIMING”.
Flavors 1 - 3 will prime first. When they are complete,
flavors 4 - 6 will prime, followed by 7 - 9, and then the
sugar. The cor responding LED will illuminate while each
flavor or the sugar is priming.
7 Upon completion, the display will read “PRIME ALL <1>”.
8 Press the CLEAN/CAL button to advance within the
Service Menu. Press and hold the CLEAN/CAL button for 4
seconds to exit the Service Menu.