Filter
Top Products
13
Model C006 Important: To the Operator
Service Display Menu
The Service Display Menu provides several screens to the operator and technician for set-
up, monitoring and evaluation.
To enter the Service Display Menu, press the CLEAN/CAL button. The screen will prompt
the operator to enter the access code. Use the product size buttons to enter the code as
follows: 3 (MED) 2 (SM) 1 (X-SM). Once the Service Display Menu is entered, the following
screens are available in the order shown. Cycle through the screens by pressing the
CLEAN/CAL button.
1. CLEAN PRESS FLVR = Clean
2. CLEAN ALL <1> = Clean All Tanks
3. PRIME ALL <1> = Prime All Tanks
4. CAL PRESS FLVR = Calibrate (Must be performed at Start-up or unit will not
dispense.)
5. BREAK IN = Break In New Product Tube
6. DATA PRESS PR/FL = Data
To exit the Service Menu, press and hold the CLEAN/CAL button for 3 seconds and
release. Note: The display will read “COFFEE”.