Filter
Top Products
DV425TR DIRECT VENT ROOM HEATER
02/01 Page 9 250-5533
FRONT OPTIONS
(Sold Separately, refer to page 57 for part numbers.)
QUARTET & SOLITAIRE FACE
INSTALLATION INSTRUCTIONS
For BOTH Quartet AND Solitaire Faces:
1. Carefully lift face into position and insert bolt beneath the ashlip to secure the face to stove. See
Figure 1. This completes installation of Solitaire face.
FIGURE 3
FIGURE 2
Solitaire Parts Include:
(1) Front Face; (1) Bolt
Quartet Parts Include:
(1) Front Face; (2) Hinged
Doors; (2) Gold plated button
head hinge pins; (1) Bolt;
(2) washers
Instructions continue for completion of the
Quartet:
Doors ship attached to the face. If they have
been removed, follow instructions 2 & 3 to
replace:
2. Install one door at a time. Slide bottom hinge
rod into lower hinge box hole on face. See
Figure 2.
3. Place washer on top of door hinge. Line up
hole in door hinge and washer with hole in
hinge box of face. Place gold-plated hinge pin
in holes to secure. See Figure 3.
Ensure that
washer is
placed here.
NOTE: See information on the instructions included
with your front if the Quartet doors require alignment.