Filter
Top Products
FPI FP90 Wood Fireplace 7
INSTALLATION
38"
43- 5/8"
14- 5/8"
13-3/8"
28"
9-5/8"
25"
15"
4-3/4"
50- 1/2"
(1283mm)
42- 5/8"
3-5/8"
1-3/8"
7-7/8"
29-1/8"
31"
37-3/8"
(1083mm)
(92mm)
(121mm)
(965mm)
(1108mm)
(371mm)
(371mm)
(949mm)
(787mm)
(740mm)
(200mm)
(35mm)
(244mm)
(381mm)
(635mm)
(711mm)
Unit Dimensions
The Regency is a wood burning fi replace
featuring a self-contained heat-circulating
system and cast-iron doors with large viewing
windows. A set of andirons are installed in
the fi rebox to properly position the fi re, do not
remove them.
Note: Illustrations shown refl ect “typical”
installations with nominal dimensions
and are for design and framing
reference only. Actual installations
may vary due to individual design
preferences. However, always
maintain minimum clearances to
combustible materials and do not
violate any specific installation
requirements.
DIMENSIONS AND SPECIFICATIONS
This fi replace system is designed for installation
in accordance with the National Fire Protection
Standard for chimneys, fi replaces and solid fuel
burning appliances; NFPA 211 and in accordance
with codes such as the BOCA Basic National
Codes, the Standard Mechanical Code, Uniform
Building Codes or applicable local codes.
FAILURE TO USE PARTS
MANUFACTURED BY FPI FIREPLACE
PRODUCTS INTERNATIONAL, LTD.,
OR VARIATIONS IN TECHNIQUES
AND CONSTRUCTION MATERIAL
DESCRIBED IN THIS MANUAL,
MAY CREATE A FIRE HAZARD AND
VOID REGENCY’S WARRANTY.
The FP90 main unit consists of the following:
1) The main fi re box and heat exchanger
2) Double doors with ceramic glass
3) Vermiculite side panels and baffl e
4) The insulated outside air duct
5) Hearth Safety Strip
6) 1" unit base stand-offs
INSTALLATION
The Regency fi replace has been tested and
listed by OMNI Test Laboratories, Inc. to UL-
127 Standard for U.S. installations. This unit
is intended for installation in conventional
homes and buildings of conventional
construction, not in mobile homes.
7) Chase Ventilation Grill
8) Nailing Strips