Filter
Top Products
30
Using SECURITY LIGHT
Use the SECURITY LIGHT button on the
handheld remote control to turn on/off
a light module set to the same house
and unit code as the console.
Using BRIGHT/DIM
Use the BRIGHT/DIM button on the
handheld remote control to brighten or
dim lights connected to Plug ’n Power
modules.
Turn on the module by pressing the re-
mote control
ON button that corre-
sponds to the module’s unit code.
Then press and hold
BRIGHT or DIM on
the remote control until the light reach-
es the desired brightness.
RESETTING THE
CONSOLE
To remove all sensors and phone
numbers from memory, unplug the
console and remove the battery. Then
plug the console back in.
49-2551AB.fm Page 30 Friday, February 19, 1999 3:41 PM