Filter
Top Products
21
3. Release TEST and wait about 20
seconds.
4. Walk past the motion detector.
The indicator lights as you move
and turns off if you keep very still
or walk out of range of the detec-
tor.
Notes:
• If the range is low (less than 30
feet), check that the detector is
horizontal and at a height of at
least 5 feet from the ground.
• The motion detector automati-
cally switches back to normal
operation after 2 minutes in the
test mode. If you want to switch it
back sooner, press the
TEST but-
ton.
To test the alarm, arm the console and
wait about 45 seconds. Then walk in
front of the motion detector and check
that the alarm is triggered.
After the motion detector triggers the
alarm, it automatically “locks out” for
about 45 seconds to save battery pow-
er.
49-2551AB.fm Page 21 Friday, February 19, 1999 3:41 PM