Filter
Top Products
29
Other Console Indicators
•
BATTERY LOW (Steady)
— bat-
tery in console is low or needs
replacement.
•
ARMED (Steady)
— indicates
system is armed.
DURING AN ALARM
When there is a violation, the console
sounds a loud (95 dB) siren for 4 min-
utes,
ARMED
flashes, and the indica-
tor for the affected zone lights steadily.
The dialer begins calling its emergency
numbers and playing its message, and
lights connected to lamp modules flash
on and off during the alarm.
AFTER AN ALARM
When you disarm the system after an
alarm (or about 4 minutes after the
alarm trips), the console’s siren turns
off, but the lights connected to lamp
modules remain on to let you know
there was a violation.
ARMED
flashes
and the zone indicator for the violated
zone lights steadily.
Press
LIGHTS OFF to stop the flashing
indicator and turn off the zone light and
lamp modules.
CONTROLING PLUG ’N
POWER MODULES
Turning Modules ON/OFF
Use the four ON/OFF buttons on the
handheld remote control to control
lights connected to Plug ’n Power mod-
ules. Set the modules to the same
house code as the console. Set the
modules’ unit codes to 1, 2, 3, or 4 to
correspond to the handheld remote
control’s buttons.
49-2551AB.fm Page 29 Friday, February 19, 1999 3:41 PM