Filter
Top Products
24
RECORDING A VOICE
MESSAGE
Follow these steps to record your voice
message. For example,
There is a
possible burglary in progress at (ad-
dress). Please press
0
to listen-in, then
call the police if you confirm there is a
problem.
Notes:
• Your message should instruct the
person to press any number on
their touch-tone phone. If the lis-
tener presses a number, the alarm
stops and they can listen-in for 75
seconds.
• If the emergency dialer reaches
an answering machine, it plays its
message just as it would if some-
one picked up the phone. How-
ever, since the answering machine
cannot trigger the “listen-in” func-
tion and stop the alarm, the dialer
continues dialing and playing its
message.
1. Set
INSTALL/RUN 1/RUN 2 on the
console to
INSTALL.
2. Press RECORD. The REC/BUSY
light turns on.
3. Speak clearly into the microphone
on the front of the console. You
can record a message up to 15
seconds long. After 15 seconds,
REC/BUSY
turns off.
Note:
Be sure
REC/BUSY
is off
before you try to initialize any
accessory.
4. Plug the supplied earphone into
the jack on the side of the con-
sole.
5. Set
INSTALL/RUN 1/RUN 2 on the
console to
RUN 1 or RUN 2. The
console plays back your message
through the earphone.
Note:
The message usually
sounds better when it is played
back over the phone line.
49-2551AB.fm Page 24 Friday, February 19, 1999 3:41 PM