Filter
Top Products
Pelco Manual C557M (10/99) 31
Fuse Values: F1 = LRD Fuse F2 = Enclosure Fuse
F1 F2
LRD41C21-1 2 A 2 A
LRD41C21-2 2.5 A 6.3 A
LRD41C21-3 500 mA 1 A
LRD41C22-1 400 mA 2 A
LRD41C22-2 1.25 A 6.3 A
LRD41C22-3 160 mA 1.0 A
LRD Input Current :
Receiver/Driver* Enclosure**
LRD41C21-1 500 mA 1.5 A
LRD41C21-2 2.0 A 6.0 A
LRD41C21-3 250 mA 900 mA
LRD41C22-1 200 mA 1.5 A
LRD41C22-2 1 A 6.0 A
LRD41C22-3 100 mA 900 mA
* This is the current required to run the Receiver, Pan/Tilt,
Camera and Lenses.
** This value considers maximum enclosure options (heaters,
wiper, blower, defroster, Pan/Tilt heater blankets).
MECHANICAL
Case Dimensions: 11.5" D x 4.5" W x 2.75" H (approx)
(29.21 cm x 11.43 cm x 6.98 cm)
Finish: Alodine
RS422 Connector: 4 position connector
Aux/Alarm
Connector: 18 position double-stack header used with two 9-position mating
connectors (See optional accessories, LRD41-CONNKIT)
Video, Sync
Connectors: BNC
Pan/Tilt Connector: 37-pin Connector
Power Connector: 6-position Plastic interlocking (female/mating connector [male])
on switch bracket)
Weight:
Unit 5 lb (2.27 kg)
Shipping 6 lb (2.72 kg)
Environmental
Operating
Temperature: 0° to 110° F
(-17.7° to 43.33° C)
OPTIONAL ACCESSORIES
LRD41C-CONNKIT Two (2) 9-Pin “quick connect/disconnect” connectors for inter-
facing with the Aux/Alarm connector on the LRD.
LRD41TLC Receiver plug-in module to allow on site testing of PTZ func-
tions on the receiver/driver.
(Design and specifications are subject to change without notice.)
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.