Filter
Top Products
62 C3434M-A (9/07)
CLEAR
Use this setting to clear user-defined settings or return the dome to factory default settings.
The following are the available settings:
ALL ZONES Clears all zones. To clear a single zone, refer to the Zones
section on page 53.
ALL PRESETS Clears all presets. To clear a single preset, refer to the Presets
section on page 46.
ALL PATTERNS Clears all patterns. To clear a single pattern, refer to the
Patterns section on page 52.
ALL WINDOW BLANKING Clears all blanked windows. To clear a single blanked window,
refer to the Window Blanking section on page 54.
CLEAR ALL EVENTS Clears all events. To clear a single event, refer to the Event
section on page 67.
RESTORE FACTORY DEFAULTS Restores all camera settings to factory default settings.
EXIT
PELCO SPECTRA IV SE HORIZON
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
CLEAR ALL EVENTS
RESTORE FACTORY DEFAULTS
BACK
EXIT
CLEAR