Filter
Top Products
C3434M-A (9/07) 19
Getting Started
Once installed, apply power to the Spectra IV SE Horizon dome system. The system will start a configuration sequence.
When configuration is done, the following information is displayed:
Pelco Spectra IV SE Horizon
Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
Refer to the following pages to learn how to operate and program your dome system.
NOTE:
When installing a Spectra IV SE Horizon dome drive in a Spectra III
™
back box for the first time, a message
appears. When the installation is complete, the dome drive will continue with a normal configuration sequence.