Filter
Top Products
20 C3434M-A (9/07)
How to Operate Your Dome System
Operation How to Control
Pan and Tilt
Move joystick or press the direction keys left/right and up/down.
Zoom Far
To zoom far, do the following:
1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom
limit.
2. Release the button or joystick for one second.
3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you
have the picture you want or reach the digital zoom
1
limit.
Zoom Wide
Press the Zoom Wide button or turn the joystick counterclockwise.
Scanning
Stop Scan Preset 96
Random Scan Preset 97
Frame Scan Preset 98
Auto Scan Preset 99
Presets
Refer to the documentation supplied with the control system.
Patterns
2
Refer to the documentation supplied with the control system.
Zones
Refer to the
Zones
section on page 53 and to the documentation supplied with the control system.
Alarms
Refer to the
Alarms
section on page 57 in this manual.
Auto Flip
Turn on or off in the programming menu. Refer to the
Auto Flip
section on page 39
in this manual.
1
Digital zoom magnifies the image electronically and the picture may appear pixelated. The larger the digital zoom limit the greater the
reduction in resolution.
2
The dome cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.