Filter
Top Products
44 C3434M-A (9/07)
POWER UP
POWER UP ACTION
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the
power to the dome is cycled.
The following settings are available:
NONE No action.
AUTO (default) The dome resumes its prior activity or direction before the power outage.
AUTO SCAN Dome starts auto scan operation.
RANDOM SCAN Dome starts random scan operation.
FRAME SCAN Dome starts frame scan operation.
PRESET 1 Dome goes to preset 1.
PRESET 2 Dome goes to preset 2.
PRESET 3 Dome goes to preset 3.
PRESET 4 Dome goes to preset 4.
PRESET 5 Dome goes to preset 5.
PRESET 6 Dome goes to preset 6.
PRESET 7 Dome goes to preset 7.
PRESET 8 Dome goes to preset 8.
PATTERN 1 Dome runs pattern 1.
PATTERN 2 Dome runs pattern 2.
PATTERN 3 Dome runs pattern 3.
PATTERN 4 Dome runs pattern 4.
PATTERN 5 Dome runs pattern 5.
PATTERN 6 Dome runs pattern 6.
PATTERN 7 Dome runs pattern 7.
PATTERN 8 Dome runs pattern 8.
EXIT
PELCO SPECTRA IV SE HORIZON
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
BACK
EXIT
POWER UP
POWER UP ACTION