Pelco IV SE Home Security System User Manual


 
38 C3434M-A (9/07)
ELECTRONIC IMAGE STABILIZATION
Electronic image stabilization is a feature of the camera that can compensate for some forms of
external influences. In all cases, care should be taken to make sure that any dome system is
mounted to a rigid location.
In the event that vibration is introduced to the dome system, a user can select one of the
electronic image stabilization settings in the menu. The available settings are OFF, 5 Hz, and
10 Hz. Users should apply each of the settings to the camera to see which one best addresses the
vibration that is affecting the video quality.
Electronic image stabilization will not correct for all ranges of vibration. If either of the settings
fails to eliminate the vibration seen in the video, other measures should be taken to isolate the
vibration or to seek a more rigid mounting location.
NOTES:
When electronic image stabilization is applied, digital slow shutter and wide dynamic range
are disabled. Zoom, image resolution, and viewing angle are also limited when this feature
is activated.
Electronic image stabilization cannot be used while in a preset that has motion detection
activated.
IMAGE ENHANCEMENT
The image enhancement feature improves the definition of objects, lines, or text in high contrast
areas, making them appear sharper.
There are two image enhancement settings:
DEFAULT Image enhancement is not activated.
ENHANCED Image enhancement is activated.
WARNING: When using this feature be aware that picture noise, although unnoticeable to the
eye, will increase and may cause compression rate changes in DVRs, NVRs, and network devices.
EXIT
PELCO SPECTRA IV SE HORIZON
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS
SHARPNESS LEVEL
AUTO WHITE BALANCE
R GAIN
B GAIN
BACKLIGHT COMP
VIDEO LEVEL
WIDE DYNAMIC RANGE
E. IMAGE STABILIZER
BACK
EXIT
TYPE OF LIGHTING
AUTO FOCUS
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
AUTO IR LEVEL
<ADVANCED SETTINGS>
CAMERA