Filter
Top Products
C3447M-B (8/09) 11
ALARMS
The alarm panel contains either a red or a green light. A red light indicates that the alarm is active, and a
green light indicates that the alarm is inactive. The alarms cannot be activated or deactivated using the
settings displayed in the Web browser. To change the alarm settings, you must use an Endura workstation.
For more information, refer to the WS5000 Advanced System Software manual.
PRESETS
The Spectra Mini dome system has 64 preset positions. The programmable presets are numbered 1–32
and 35–55.
For more information, refer to the Spectra Mini Operation/Programming manual.
To call up a programmed preset:
1. Click the Presets tab in the “presets, patterns, and aux control panel.”
2. Click the Preset box and type the preset number.
3. Click the Go button. The camera moves to the preset location and displays it in the live video pane.
To program a preset:
1. Click the Presets tab in the “presets, patterns, and aux control panel.”
2. Click the Preset box and type a number that you want to assign to the preset you are creating.
NOTE: Be careful that you assign a number to the new preset that is not already assigned to another
programmed preset. If you assign the new preset with the number of an existing preset, the previously
programmed preset will be replaced by the new preset.
3. Move the camera to the desired location of the live video pane.
4. Click the Set button. The preset with the number you assigned is now programmed to the location
displayed in the live video pane.
PATTERNS
To call up the programmed pattern:
1. Click the Patterns tab in the “presets, patterns, and aux control panel.”
2. Click Run. The pattern is displayed in the live video pane.
To program a pattern:
1. Click the Patterns tab in the “presets, patterns, and aux control panel.”
2. Click Start.
3. In the live video pane, move the camera to the desired series of locations.
4. Click End.
AUXILIARY CONTROLS
To turn on and off the auxiliary settings:
1. Click the Aux tab in the “presets, patterns, and aux control panel.”
2. Click either the On or Off button to perform the desired function.
For auxiliary configuration instructions, refer to the Spectra Mini Operation/Programming manual.