Filter
Top Products
17
ENGLISH
■ Header
A To outdoor unit
B To indoor unit
• No restriction is applied to the mounting posture of the header.
• If the diameter of the refrigerant piping selected using the proce-
dures described on pages
14
and the size of the joint is different,
match the sizes using a deformed joint. The deformed joint is in-
cluded with the kit.
B
A
C Pipe cutter
D or
E Deformed joint
• When the number of pipes to be connected is smaller than the number
of header branches, install a cap to the unconnected branches. The
cap is included with the kit.
C
E
D