Filter
Top Products
11 - 27
MELSEC-F
TROUBLESHOOTING11
11 - 27
Error code
(abnormal
code)
Description of error Error handling
Storage destination
Initial
Open
Fixed
sending
Connection
Error code
E-mail log
BFM#
105
BFM#
124
BFM#
125
BFM#
126
BFM#
229
BFM#
23361
C139
H
System error
• The OS detected any error.
(*1)
C13A
H
The SMTP server was performing processing
and an error response was received.
(Exceeded the allocation of memory area)
• Check the status of the SMTP server.
C13B
H
The SMTP server was performing processing
and an error response was received.
(Illegal mail box name)
• Check that the Ethernet module's mail
address is set correctly.
C13C
H
System error
• The OS detected any error.
(*1)
C13D
H SMTP server authentication error.
• Check whether the SMTP login ID and SMTP
password are correct.
• Check the SMTP server status.
C13E
H SMTP server authentication nonsupport error
• Check whether the SMTP server supports
authentication.
• Set [SMTP authentication method] to [No
authentication] or [POP before SMTP].
C140
H Could not open the POP3 server.
• Check the port number of the POP3 server
setting.
• Check whether or not it is possible to
communicate with the POP3 server using the
Ping command.
C141
H
Cannot communicate with the POP3 server.
(Error response)
• Check the port number of the POP3 server
setting.
• Check if the POP3 server is busy.
C142
H
Cannot communicate with the POP3 server.
(Abort)
• Check if the POP3 server is busy.
C143
H
Cannot communicate with the POP3 server.
(Reset response)
• Check if the POP3 server is busy.
C144
H
Could not receive a response from the POP3
server.
• Check whether or not the POP3 server is
faulty.
• Check whether or not there is too much load
on the network.
• Check that the correct password is being
sent to the POP3 server.
C145H Forcibly disconnected from the POP3 server.
• Check whether or not the POP3 server is
faulty.
C146
H Could not close the POP3 server.
• Check whether or not the POP3 server is
faulty.
• Check whether or not there is too much load
on the network.
C147
H
Closing the POP3 server gave an error
response.
• Check whether or not the POP3 server is
faulty.
C150
H POP3 server authentication error • Check the status of the POP3 server.
C151
H
The Ethernet module's mail address (e-mail
address setting parameter) is different from the
account name in the mailbox on the server side.
• Check the account name in the mailbox on
the server side and correct the mailbox
account set for the Ethernet module.
C152
H
The Ethernet module's password (e-mail setting
parameter) is different from the password on the
server side.
• Check the password on the server side and
correct the password set for the Ethernet
module.
C153H
An error occurred when getting the received
mail list.
(Failed to obtain the list of arrived mail at the
POP3 server.)
• Check the status of the POP3 server.
• Send again after arbitrary set time has
passed.