Filter
Top Products
10 - 19
MELSEC-F
USING THE E-MAIL FUNCTION10
10 - 19
(1) Send using the sequence program
Method for sending e-mails by the sequence program is similar to the one by an
attached file.
See Subsection 10.7.1 for sample programs for sending e-mail from PLC.
(2) Receiving by a personal computer
The following explains how a PC/UNIX/portable terminal receives e-mail sent
from the Ethernet module.
After setting an environment for using the Internet with application software that
processes e-mails, e-mails can be received on a receive message screen as
shown below.
(Example) The following shows an example of a received e-mail.
(The screen display shows Microsoft Corporation's Outlook
Express 6.)
(a) From
Displays the e-mail address of the Ethernet module.
NOTE
By entering the mail addresses of the send destination devices in the address book,
the registered names (display names) can be displayed and makes management
easier.
(b) Subject
This indicates the transmission destination No. (*1) and the Subject written
by a sequence program.
*1 The Ethernet module automatically adds this number, sequentially,
starting from 00001.
(After the maximum number (99999) is reached, the number starts again
from 00000.)
(c) Main text of e-mail
This indicates the main text of the e-mail sent by the Ethernet module.
Mail address of Ethernet module
(b)
(c)
Mail address of external device
(a)
"No.00001 testmail msend"