Filter
Top Products
9 - 35
MELSEC-F
WHEN COMMUNICATING DATA USING THE MC PROTOCOL9
9 - 35
9.4 Remote RUN/STOP, PLC model name code read
This function is used to remotely RUN/STOP a PLC and read the model name of a
PLC from an external device.
9.4.1 Commands and control contents
This section describes the commands and control contents of the control procedure
when controlling the status of the PLC.
(1) Commands
Function Command / Response type Processing
Remote RUN 13
H
Requests remote RUN (execute operation)
Executes a forced RUN regardless of the RUN/STOP switch status of PLC.
Remote STOP 14
H
Requests remote STOP (stop operation)
Executes a forced STOP regardless of the RUN/STOP switch status of PLC.
PLC model name read 15
H Request to read the model name of the PLC.