Filter
Top Products
10 - 6
MELSEC-F
USING THE E-MAIL FUNCTION10
10 - 6
10.5 Processing Procedure of the E-mail Function
The following flowchart illustrates the procedure that is required before sending
e-mails:
Start
When DNS is not used
When DNS is used
Register the DNS server
See Section 10.6 (1)
Register the mail address of the local station's Ethernet module
Register the mail address of
the external device
See Section 10.6 (3)
Send data as
an attached file
of an e-mail
Send data as
main text of e-mail
See Section 10.7 See Section 10.8
The open and close processing of
the communication line for
sending e-mails is automatically
executed by the Ethernet module.
1 1
1
Setting the email parameters using FX Configurator-EN-L or the
ladder and re-initialize the Ethernet module.