Filter
Top Products
Presser Foot Types (continued)
• Satin stitch foot (Foot F)
Use this foot for satin stitch and outlining applique.
For: Darning (page 46)
Satin stitch (page 48)
Monograming (page 50)
Applique (page 50)
Shell stitch (page 60)
Twin needle stitches (page 66)
Smocking (page 70)
Foot F:
Prensatetas F:
Pied F:
J
• Oversdge foot (Foot C)
This foot is specially constructed for stitching and/or
overcasting seams. The small brush and wire guides help
control the fabric, hold the raw edge in place and keep it
from puckering, especially when sewing on knit fabrics.
For: Overcasting stitch (Page 54)
Overedge Stitch (Page 64)
Serging (page 72)
• Buttonhole foot (B)
Use this foot for manual buttonholing.
It is marked to help you measure your buttonholes
accurately.
For: Manual buttonhole (page 84)
• Quilter
The quilter will help to keep the stitching lines straight.
For: Straight stitching (page 40)
S
Foot C:
Prensatetas C:
Pied C
Foot B:
Prensatelas B:
Pied B
Quilter:
Acolchador:
Guide a matetasser:
J
j/
14