Filter
Top Products
Cleaning the Shuttle Race and Feed Dogs
[] Unplug the machine and remove the presser foot and
needle. Open the face cover to allow room to remove the
needle plate screw with a screwdriver. Remove the needle
plate _1_and take out the bobbin.
(_ Needle plate
[] Lift up the bobbin holder(_ and remove it.
(_ Bobbin holder
[] Brush out dust and lint inside the bobbin holder. Clean
the feed dogs ®and hook race _:)with a lint brush. Wipe
out gently with a soft, dry cloth.
® Feed dogs
(_ Hook race
[] Line up the triangle marks @ and position the bobbin
holder, so that the notch fits next to the stopperS) in the
hook race.
@ Line up the triangle marks.
The notch fits next to the stopper.
S
[]
[]
[]
[]
®
\\
\
\
\\\\\
®
Oiling the Machine
Unplug the machine. Open the face cover and oil the two
points, as shown, at least once a year. One or two drops of
oil is sufficient. Remove excess oil, otherwise it may stain the
fabric. In case the machine has not been used for a long
period, oil it before sewing. Use quality sewing machine oil.
S
J
96