Filter
Top Products
A-20
MDrive 34Plus
Microstepping Hardware - Revision R071108
Relevant to Firmware Version 3.0.02
86) Select “Search for the best driver in these locations.”
(a) Check “Include this location in the search.”
(b) Browse to the location where you extracted the files in Step #2.
(c) Click Next (Figure C.7).
9) The drivers will begin to copy.
10) On the Dialog for Windows Logo Compatibility Testing, click “Continue Anyway” (Figure C.8).
11) The Driver Installation will proceed. When the Completing the Found New Hardware Wizard dialog
appears, Click “Finish” (Figure C.9).
12) Upon finish, the Welcome to the Hardware Update Wizard will reappear to guide you through the
second part of the install process. Repeat steps 3 through 11 above to complete the cable installation.
11) Your IMS MD-CC30x-001 is now ready to use.
Figure C.7: Hardware Update Wizard Screen 3
Figure C.8: Windows Logo Compatibility
Testing
Figure C.9: Hardware Update Wizard Finish Installation