A-17
Appendices
MD-CC303-001
The MD-CC3030-001 interfaces to the model MDrivePlus Microstepping with a 12-Pin locking wire crimp
type connector at location P1. This cable consists of two joined cables:
6' (1.8m) RJ-45 Cable which plugs into the RJ-45 Jack of the converter body.1.
13' (4.0 m) for I/O and Power connection.2.
Connection Diagram
*A Prototype Development cable with out integrated communications is also available.
Order P/N PD12-1434-FL3
P1
MD-CC303-001 USB to SPI
Communications Converter
Plug into
Computer
USB Port
6’ (1.8 m)
USB Cable
13’ (4.0 m)
MD-CC3
USB to SPI Converter Cable
www.imshome.com
USB Cable
Length 6.0 ft (1.8 m)
RJ-45 Cable - Communications
Length 6.0 ft (1.8 m)
Cable - Power and I/O
Length 13.0 ft (4.0 m)
1.0 in
(25.0 mm)
3.75 in
(95.0 mm)
0.875 in
(22.0 mm)
USB
To PC USB
6’ (1.8 m)
AMP
12
RJ-45
Flying Leads
Wire Colors Function
Orange Enable
Blue Direction
White Opto Ref
Green Step Clock
Red and Black wires are N/C
Figure C.3: MD-CC303-001 Mechanical Specifications and Connection