Filter
Top Products
2-6
MDrive 34Plus
Microstepping Hardware - Revision R071108
Relevant to Firmware Version 3.0.02
Figure 2.1.3: Typical MDrive Shown with Leads Secured
A
dhesive Anchor/Tywrap
P1: Logic Wiring
P3: Power
Separation between
Logic and Power
Securing Power Leads and Logic Leads
Some applications may require that the MDrive move with the axis motion. If this is a requirement of your
application, the motor leads must be properly anchored. This will prevent flexing and tugging which can
cause damage at critical connection points within the MDrive.