Filter
Top Products
EchoLife HG612 FTTC VDSL NTE
User Guide
5 Parameter Settings
Issue 01 (2009-05-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5-13
Multiple QoS methods are used to provide different priorities to different services or data
flows to ensure that high-priority data is processed at first priority.
Different applications provided by the HG612 impose different QoS requirements. To
meet these QoS requirements, the HG612 may resort to service classification to provide
the required QoS through DiffServ. The HG612 sets an independent queue for each
priority and uses a strict priority or the weighted round robin (WRR) mechanism to
control the output of each priority queue.
Only the HG612 with the routing software supports the QoS function.
Path
Choose Advanced > QoS.
Parameter Description
Table 5-14 describes QoS parameters.
Table 5-14 QoS parameters
Parameter Description
Enable It specifies whether to enable the QoS function.
BandWidth It specifies the bandwidth of the QoS.
QueueType It specifies the queue type of the QoS.
Table 5-15 describes classification parameters.
Table 5-15 Classification parameters
Parameter Description
Rule name It specifies the rule name.
Classification It specifies whether to enable the classification function.
SET1
In
SET1
, you can set certain parameters, such as
Source
MAC
,
Dest MAC
,
Source IP
, and
Source IP Mask
.
Multiple rules can be used simultaneously. If multiple rules
are used, all the rules must be met so that the classification
can take effect.
SET2 It specifies the IEEE 802.1p traffic classification rule.