Filter
Top Products
5 Parameter Settings
EchoLife HG612 FTTC VDSL NTE
User Guide
5-6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-05-15)
Parameter Description
Connection type You can select one of the following options:
z
DHCP: If this option is selected, the HG612 obtains its IP
address used for the WAN connection from the DHCP
server of the service provider.
z
Static: If this option is selected, the HG612 uses the static
IP address provided by the service provider for the WAN
connection. You need to enter the IP address, subnet mask,
default gateway, and DNS name provided by the service
provider.
z
PPPoE: If this option is selected, the HG612 uses the
PPPoE mode for the WAN connection, that is, the HG612
uses the embedded PPPoE dial-up software for dialing.
You can choose the dialing method as required.
WAN802.1q,
WAN802.1p,
LAN802.1q, and
LAN802.1p
They specify whether to enable the WAN802.1q,
WAN802.1p, LAN802.1q, and LAN802.1p.
NAT It specifies whether to enable the NAT function.
If the NAT function is enabled, the HG612 maps the internal
IP addresses of the LAN to the ports that correspond to the
WAN IP addresses of the PVC.
If the NAT function is disabled, the HG612 cannot use the
functions related to the NAT and the computer connected
with the HG612 may be unable to access the Internet.
You are recommended to set this parameter to
Enable
.
Submit To save the settings, click this button.
Note
z DNS = Domain Name Server
z NAPT = Network address and Port Translation
Table 5-5 describes protocol parameters.
Table 5-5 Protocol parameters
Parameter Description
IP Address
This parameter is valid when
Connection type
is set to
Static
.
It specifies the WAN IP address of the PVC.
Subnet Mask
This parameter is valid when
Connection type
is set to
Static
.
It specifies the WAN subnet mask of the PVC.