Filter
Top Products
5 Parameter Settings
EchoLife HG612 FTTC VDSL NTE
User Guide
5-8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-05-15)
Table 5-6
in to the Web-based configuration utility, you need to enter the new IP address of the
LAN interface of the HG612 in the address bar of the Internet Explorer.
Path
Choose Basic > LAN.
Parameter Description
Table 5-6 describes LAN parameter.
LAN parameters
Parameter Description
IP address
It specifies the primary IP address of the LAN interface of the
HG612. You can access the Web-based configuration utility of
the HG612 through this IP address. If you enable the DHCP
function of the HG612, the HG612 allocates an IP address in
the same network segment as that of this IP address to the
computer.
Subnet mask
It specifies the subnet mask for the primary IP address of the
LAN interface of the HG612.
DHCP server It specifies whether to enable the DHCP server.
If you select
Enable
, the HG612 serves as a DHCP server and
allocates IP addresses to the computers in the LAN.
Start IP address
It specifies the start IP address among a group of continuous IP
addresses.
End IP address
It specifies the end IP address among a group of continuous IP
addresses.
DHCP relay It specifies whether to enable the DHCP relay.
If you select
Enable
, the HG612 forwards the data packets
containing an IP address request to the DHCP server for
processing.
Primary DNS server
address
It specifies the primary DNS server allocated to the computers
in the LAN.
Secondary DNS
server address
It specifies the secondary DNS server allocated to the
computers in the LAN.
DHCP port
transparent
transmission
It specifies whether to enable the DHCP port transparent
transmission.