Filter
Top Products
EchoLife HG612 FTTC VDSL NTE
User Guide
5 Parameter Settings
Issue 01 (2009-05-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5-5
Table 5-4
The HG612 communicates with the upper-layer network equipment of an operator
through the WAN interface. During the communication, the parameter settings of the
HG612 must be consistent with those of the upper-layer network equipment. On the
WAN Connection page, you can set WAN parameters.
Path
Choose Basic > WA N.
Parameter Description
Table 5-4 describes WAN parameters.
WAN parameters
Parameter Description
Layer2 interface It specifies the ID of the connection to be configured.
WAN connection It specifies whether to enable the connection.
Service list You can select one of the following options:
z
INTERNET: If this option is selected, the WAN
connection provides only data services.
z
TR069: If this option is selected, the WAN connection
provides only the services related to TR-069.
z
TR069_INTERNET: If this option is selected, the WAN
connection provides both data and TR-069 services.
Port binding
It specifies the LAN interface to be bound for the WAN
connection.
Connection mode
It specifies the working mode of the PVC. You can select
either of the following two options:
z
Bridge: If this option is selected, the PVC is set to the
bridge mode. In this mode, PPP dial-up software needs to
be installed on the computer that is connected to the
Internet through the PVC to implement Internet access
through a dial-up connection.
z
Route: If this option is selected, the PVC is set to the
routing mode. Only the HG612 with the routing software
supports the routing mode. In this mode, the HG612
connected to the Internet through the PVC can access the
Internet by using its own routing function and thus PPP
dial-up software does not need to be installed.