Filter
Top Products
EchoLife HG612 FTTC VDSL NTE
User Guide
3 Getting Started
Issue 01 (2009-05-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3-5
3.4.3 Configuring the ATM Route–Static
Step 1
Basic > ATM.
vided by the ISP.
Step 2
Basic WAN
2. S -down list box.
Note
th atm.
or WAN802.1q, WAN802.1p, LAN802.1q, LAN802.1p, or NAT as
N connection.
Step 3
s and subnet mask of the LAN connection.
corresponding parameters.
3.4.4 Configuring the ATM Route–PPPoE
Step 1
Basic > ATM.
vided by the ISP.
Step 2
2. S wn list box.
Configure the ATM PVC.
1. In the ion tree, choose
navigat
2. Enter VPI/VCI pro
3. Set DSL link type to EoA.
Submit
4. Click .
Set WAN parameters.
1. In the navigation tree, choose > .
elect a PVC from the Layer2 interface drop
z The name of this PVC should begin wi
z The DSL link type of this ATM PVC should be EoA.
3. Select Enable for WAN connection.
ce list drop-down list box.
4. Select a service from the Servi
5. Set Port binding to LAN1 or LAN2.
6. Select Route from the Connection mode drop-down list box.
7. Set Connection type to Static.
8. Select Enable f
required.
9. Set the IP address and subnet mask of the WA
10. Click Submit.
Set LAN parameters.
n tree, choose Basic > LAN.
1. In the navigatio
2. Set the IP addres
3. Select Enable for DHCP server, and then set the
4. Click Submit.
Configure the ATM PVC.
n tree, choose
1. In the navigatio
2. Enter VPI/VCI pro
3. Set DSL link type to EoA.
4. Click Submit.
AN parameters. Set W
1. In
the navigation tree, choose Basic > WAN.
elect a PVC from the Layer2 interface drop-do