Filter
Top Products
3 Getting Started
EchoLife HG612 FTTC VDSL NTE
User Guide
3-4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Issue 01 (2009-05-15)
ick Submit.
Note
ode
ver ATM
ier
C M Route–DHCP
Step 1
ATM.
the ISP.
pe to EoA.
Step 2
lect a PVC from the Layer2 interface drop-down list box.
Note
hould be EoA.
rop-down list box.
n mode drop-down list box.
r WAN802.1q, WAN802.1p, LAN802.1q, LAN802.1p, or NAT as
Step 3
or DHCP server, and then set the corresponding parameters.
ick Submit.
Note
4. Cl
z ATM = Asynchronous Transfer M
z ISP = Internet service provider
z PPPoA = Point-to-Point Protocol o
z PVC = permanent virtual channel
z VCI = Virtual Channel Identif
z VPI = Virtual Path Identifier
z WAN = Wide Area Network
3.4.2 onfiguring the AT
Configure the ATM PVC.
1. In the navigation tree, choose Basic >
2. Enter VPI/VCI provided by
3. Set DSL link ty
4. Click Submit.
Set WAN parameters.
1. In the navigation tree, choose Basic > WAN.
2. Se
z The name of this PVC should begin with atm.
z The DSL link type of this ATM PVC s
3. Select Enable for WAN connection.
4. Select a service from the Service list d
5. Set Port binding to LAN1 or LAN2.
6. Select Route from the Connectio
7. Set Connection type to DHCP.
Select Ena
8. ble fo
required.
9. Click Submit.
Set LAN parameters.
1. In the navigation tree, choose Basic > LAN.
2. Set the IP address and subnet mask of the HG612.
3. Select Enable f
4. Cl
EoA = Ethernet over ATM