Filter
Top Products
THX9321 PRESTIGE
®
2.0 AND THX9421 PRESTIGE
®
IAQ 2.0 WITH EIM
11 68-0311—01
Fig. 21.
NOTE: If the thermostat did not connect to the EIM or
Wireless Adapter, verify the “Connected” LED is
still flashing and the thermostat is at least 2 feet
away from the EIM or Wireless Adapter, and
repeat steps 1–4 above.
“Connected” Status Light (Fig. 20)
• Green flashing: In Wireless Setup mode.
• Green steady: RedLINK device(s) are communicating.
• Red: RedLINK device(s) not communicating. Check EIM
and RedLINK devices.
Link Optional RedLINK™ Accessories
NOTE: If you are not connecting any RedLINK devices,
skip to “Installer Setup” beginning on page 14.
1. While the Add Device screen (see Fig. 22) is displayed
on the thermostat, press and release the CONNECT but-
ton on each wireless device. Accessories need to be at
least 2 feet away from the thermostat, EIM, or TrueZONE
Wireless Adapter during the linking process.
Fig. 22. Add Device screen.
2. Press DONE on the Add Device screen after ALL
devices have been linked (see Fig. 22).
NOTE: If you need to return to the “Add Device” screen
to add devices later, press MENU and scroll
down to INSTALLER OPTIONS. Enter the date
code (password) when prompted. The date
code is printed on the back of the thermostat or
press MENU > EQUIPMENT STATUS to find
the date code. Scroll down to WIRELESS
DEVICE MANAGER and then select ADD
DEVICE.
Link Wireless Outdoor Sensor
1. Press and release the CONNECT button. After a short
delay, the thermostat will display “Wireless Outdoor Sen-
sor added” on the Add Device screen.
Fig. 23. Wireless outdoor sensor connect button.
Link Portable Comfort Control
1. Press CONNECT on the Portable Comfort Control dis-
play screen.
Fig. 24. Portable Comfort Control connect button.
2. Press DONE on the Portable Comfort Control when it
displays “Connected.”
3. Press “No” at the next screen to save and exit, or press
“Yes” if you need to connect additional thermostats to the
Portable Comfort Control. See Fig. 25.
NOTE: The Portable Comfort Control can control up to 16
thermostats.
Fig. 25. Connect additional thermostats to Portable
Comfort Control.
4. Follow the same linking procedure as above to connect
additional thermostats.
MCR28847A
MCR32942
CONNECT
WIRELESS SETUP
NOYES
CONNECT MORE?
M28482