Filter
Top Products
THX9321 PRESTIGE
®
2.0 AND THX9421 PRESTIGE
®
IAQ 2.0 WITH EIM
101 68-0311—01
To remove accessories from an Equipment
Interface Module (EIM) or thermostat
AT THE THERMOSTAT
1. Press MENU > INSTALLER OPTIONS, then enter date
code when prompted (print on back of thermostat). Or
press MENU > EQUIPMENT STATUS to find the date
code.
2. Scroll down to select WIRELESS DEVICE MANAGER.
3. Press REMOVE DEVICE, then select the device you
want to remove.
OR
AT THE EQUIPMENT INTERFACE MODULE
1. Press and hold the CONNECT button on the Equipment
Interface Module until the status light glows amber (hold
for about 10 seconds). This will disconnect ALL devices
from the Equipment Interface Module.
NOTE: If the thermostat is setup without an EIM, all ther-
mostat settings must be reset before it can be
used with an EIM. Press MENU > INSTALLER
OPTIONS, scroll down to select ADVANCED
OPTIONS, then press RESTORE FACTORY
DEFAULTS.